Waterproof Wired Tracker
The easiest way to wire this tracker is to connect the red Red+ to live power and Black- negative to ground.
Ignition detection can be added by linking Din1 to ignition input or by linking VCC power to the ignition line and the tracker will detect the increase in voltage.
Contact Us if you need assistance in setting up the optional cut off ignition circuit.
Navigation LED Indications
Normally after Connecting to the vehicle both leds are flashing together to show it has cellular & satelite signal.
|Permanently Switched On||Satellite signal is not received|
|Blinking Every Second||Normal mode, Satelite signal is working|
|Off||Satelite signal is turned off because:|
Device is not working
Device is in sleep mode
|Blinking Fast Constantly||Device firmware is being flashed|
Status LED Indications
|Blinking Every Second||Normal mode|
|Blinking Every Two Seconds||Sleep mode|
|Blinking Fast For A Short Time||Cellular Signal activity|
|Off||Device is not working|
Device is in boot mode